COOSPO BK467 Speed & Cadence Sensor Set (2-Pack) – Magnet-Free, Bluetooth & ANT+, IP67, for Garmin, Wahoo, Zwift & Bike Computers

Track your pedaling and your speed at the same time, without a magnet. The COOSPO BK467 set includes two tiny wireless cycling sensors, one for cadence and one for speed. Clip one on your crank arm and the other on your wheel hub, and send live cadence and speed data to your bike computer, smartphone, or indoor training app over Bluetooth and ANT+. 🚴📊✨

Each sensor works in cadence mode or speed mode, which you choose by reinstalling the battery. Blue light means cadence mode and red light means speed mode. Use one of each for both measurements, or set both the same way if you ride two bikes.

⚠️ Important Note
Each sensor measures cadence or speed, not both. The set gives you one of each so you can track both at once. Please check that your bike computer, watch, or app supports Bluetooth or ANT+ speed and cadence sensors. Some apps cannot connect to two sensors of the same type at once, and the manufacturer notes that the Wahoo app cannot track two data types at the same time even with two sensors, so please check your app before ordering. Please check your crank arm and hub fit using the included rubber pad and O-rings. ✅📲

🔄 Two Sensors, Two Modes
✅ One sensor for cadence (blue LED) and one for speed (red LED)
✅ Switch modes by reinstalling the battery
✅ Cadence up to 300 rpm and speed up to 120 km/h
Track both measurements together. 🔵🔴✅

🧲 Magnet-Free Design
✅ No spoke magnets and no alignment needed
✅ Clip on the crank arm or wheel hub
✅ Compact 41 × 34 × 10mm body, about 9.5g each
Quick to install on most bikes. 🔧✅

📡 Bluetooth & ANT+ Connectivity
✅ Bluetooth Low Energy and ANT+ dual-mode connection
✅ Works with Garmin, Wahoo, COOSPO, iGPSPORT, Onelap, Bkool, Tacx, and Bryton devices, as listed by the manufacturer
✅ Works with apps such as Zwift, Rouvy, RidewithGPS, TrainerRoad, and COOSPORIDE
Connect to your phone, GPS computer, or trainer app. 📲✅

🔋 Up to 500 Hours of Battery
✅ Replaceable CR2032 coin cell battery in each sensor
✅ Up to about 500 hours of riding, according to the manufacturer
Battery life varies with use. ⚡✅

💧 IP67 Protection
✅ Protected against rain, splashes, and brief immersion
Ride in any weather. 🌧️✅

📲 COOSPORIDE App
✅ Live cadence or speed on your phone during rides
✅ Free app support for setup and live data
Simple setup in minutes. 📱✅

📏 Specifications
✅ Model: BK467
✅ Size: 41 × 34 × 10mm each
✅ Wireless: Bluetooth and ANT+
✅ Waterproof: IP67
✅ Working temperature: -10°C to 50°C
✅ Certifications: CE, FCC, RoHS, and WEEE
Compact and easy to carry. 📏✅

📦 What's in the Box?
✅ COOSPO BK467 Speed & Cadence Sensors ×2
✅ Rubber Pads and O-Rings for mounting

If you want a magnet-free cycling sensor set that tracks speed and cadence at the same time, with Bluetooth and ANT+, IP67 protection, and up to 500 hours of battery, the COOSPO BK467 two-pack is a simple way to add real data to every ride. 🚀🚴📊